IBM SureMark 4610 1NF, Руководство по обслуживанию оборудования

Страница: 19 / 112

Models and features
The following information is a high-level summary of the features and specifications for the IBM SureMark
4610 Model 1NF printers. Depending on the model, some features might not be available, or some
specifications might not apply.
Table 1. Feature and specifications
Printer:
v Print speed - up to 80 lps
(thermal single color printing)
v Dots per inch (dpi)- 203
v
Print method - Thermal
v Quiet paper cutter and tear
bar
v Beeper
v
Paper:
– Size:
- 80 mm single- or
two-color
- 102 mm (4 in) maximum
outer diameter internal
roll
– Easy one-handed paper
loading
v
Bar code generation
v Mounting
– Distributed (free standing)
Communication:
v
Ports and connectors:
– RS-232 (9-pin D-shell) for
POS Terminal
Communications
– RS-232 (9-pin D-shell) for
Government Audit Port
– Powered USB port
– DC connector
– Cash Drawer (RJ-11)
– Character Display (USB)
v
Operating systems:
– Microsoft MS-DOS
®
– Microsoft Windows XP
®
– Linux
– 4690 OS
v
Drivers:
– UPOS (OPOS and
JavaPOS
™
)
– 4690 OS
Size:
v
Size
– Height:
- Cover closed - 196 mm (7.72
in)
- Cover open - 297 mm (11.69 in)
– Depth -177 mm (6.97 in)
– Width - 145 mm (5.7 in)
– Weight:
- Fiscal ready - 1.7 kg (3.75 lb)
- Fiscal - 2.5 kg (5.51 lb)
Power supply:
v Standard 4610 power supply
– 110/220 VAC Input
– +24 VDC Output
– 75 W
v Terminal supplied power option
(Powered USB):
– 24 V powered USB connection
using the IBM supplied cable
Fiscal:
v
Electronic journal - 2 GB electronic
journal card (minimum)
v
Secure Fiscal enclosure with epoxied
Fiscal memory
v
Allows control of 2 x 20 character
displays, if required by country fiscal
regulations
v Audit port (DB-9)
v
Country specific fiscal compliance
v Base for IBM business partner fiscal
solution
Controls, indicators, and sensors:
v
Controls
– Cover latch
– Paper feed
– Power switch
v
Indicators
– Beeper
– Status LED
– Paper status LED
v
Enhanced system management
sensors
– Paper present
– Low-paper sensing
– Paper jams
– Cutter health
– Printhead status
– Statistics reporting
Acoustical noise emissions:
v Sound power, idling: 61.5 bel
Environment:
v
Air temperature:
– Printer on: 5° to 40° C (42.8° to
104° F)
– Printer off: 0° to 60° C (32° to
140° F
v
Humidity
– Operating: 8% to 80% relative
humidity
– Storage: 5% to 80% relative
humidity
Note: These levels were measured in
controlled acoustical environments
according to the procedures specified by
the American National Standards
Institute (ANSI) S12.10 and ISO 7779
and are reported in accordance with
ISO 9296. Actual sound-pressure levels
in a given location might exceed the
average values stated because of room
reflections and other nearby noise
sources. The declared sound-power
levels indicate an upper limit, below
which a large number of printers will
operate.
Chapter 1. Introduction
5