IBM Security Hardware
Disk Drive Assembly Replacement Instructions
This document helps you to complete the following tasks:
v
Remove a failed disk drive and replace it with a new disk drive
v
Verify that the new disk drive is working correctly
Important:
Before you proceed with these instructions, review the
IBM Systems Safety Notices
provided in
the
IBM Media Terms and Conditions CD
that is included with your appliance model.
Note:
The illustrations in this document might differ slightly from your appliance model.
Supported appliances
The following table lists the appliance models that are supported by the instructions in this document:
Replacing a disk drive assembly
Before you begin
You must have the applicable replacement disk drive assembly before you can remove and replace the
failed disk drive assembly.
Identifying the disk drive assembly
The front panel of the appliance contains the disk drive assembly, as highlighted in yellow in Figure 1.
Figure 1. Location of the disk drive assembly on the front of the appliance
Product
Model
IBM
®
Part Number
IBM Security Network Protection
XGS 3100
97Y0977
XGS 4100
97Y0823
XGS 5100
97Y0612
IBM Security SiteProtector
™
System
SP 4001
97Y1346
