IBM SCM, Руководство пользователя

Страница: 31 / 54

10. Secure the Heat Sink
a.
Upon placing the heat sink on the SCM, ensure that the heat sink load arms on both sides of the
heat sink become engaged.
b. While holding the heat sink in place, use the nut driver (P/N 46K5039) to tighten the heat sink
actuation screw (A). Turn the screw clockwise to tighten and secure the heat sink.
Note: If during this step, the heat sink moves noticeably to one side, it is likely that a load arm
is not engaged. If this happens:
1) Loosen the actuation screw.
2) Hold the load arm onto the heat sink while tightening the screw until a firm stop is reached.
A
11. Placing the previously removed SCM into the Packaging
a. Lightly grip the SCM that you replaced by the edges and lift it off of the packaging cover.
b.
Align the beveled corner of the SCM (A) to the corner of the packaging with the triangle (B) and
place it in the packaging. Close the packaging cover.
Install SCM
27