IBM SAN512B-6, Инструкция по установке, обслуживанию и эксплуатации

Страница: 272 / 286

Pin Signal Description
6 UART1_TXD Receive data
7 Not supported NA
8 Not supported NA
Serial port specifications (protocol)
Parameter Value
Baud 9600
Data bits 8
Parity None
Flow control None
Note:
Flow control on customer terminal
servers.
Memory specifications (per CP blade)
Memory Type Size
Main memory DDR3 MiniDIMM 16 GB
Boot flash On-board NAND 4 MB
Compact flash eUSB 16 GB
Regulatory compliance (EMC)
v FCC Part 15, Subpart B (Class A)
v EN 55022 (CE mark) (Class A)
v EN 55024 (CE mark) (Immunity) for Information Technology Equipment
v ICES-003 (Canada) (Class A)
v AS/NZ 55022 (Australia) (Class A)
v VCCI (Japan) (Class A)
v EN 61000-3-2
v EN 61000-3-3
v EN 61000-6-1
Regulatory compliance (safety)
v CAN/CSA-C22.2 No. 60950/UL 60950
v EN 60825 Safety of Laser Products
v EN 60950/IEC 60950 Safety of Information Technology Equipment
Regulatory compliance (environmental)
v 2014/35/EU and 2014/30/EU
v 2011/65/EU - Restriction of the use of certain hazardous substance in electrical
and electronic equipment (EU RoHS).
v
2012/19/EU - Waste electrical and electronic equipment (EU WEEE).
v 94/62/EC - packaging and packaging waste (EU).
v 2006/66/EC - batteries and accumulators and waste batteries and accumulators
(EU battery directive).
248
SAN512B-6 Installation, Service, and User Guide