IBM SAN40B-4 - System Storage Switch, Руководство пользователя и обслуживания

Страница: 63 / 79

Table 16. Switch power supply specifications (continued)
Specification Value
System power consumption 84 watts nominal, 91 watts maximum
Input voltage 85 - 264 VAC, universal
Input line frequency 47 - 63 Hz
BTU rating 406 BTU/hr
Inrush current 15 Amps to 35 Amps Maximum
Supported SFPs and HBAs
Use only SFPs that are tested and supported. For the most up to date list of
supported SFPs and HBAs for the switch, refer to the product interoperability matrix
at the IBM SAN Support web pages at: http://www.ibm.com/servers/storage/support/
san
System specifications
Table 17 lists the system specifications for the switch.
Table 17. General specifications
Specification Descriptions
Autoconfiguring port types E_Port, F_Port, FL_Port, M_Port, and
EX_Port
System architecture Nonblocking shared-memory switch
System processor IBM PowerPC 440EPx, 667 MHz CPU
ANSI Fibre Channel protocol FC-PH (Fibre Channel Physical and
Signalling Interface standard)
Modes of operation Fibre Channel Class 2, Class 3, Class F
Fabric initialization Complies with FC-SW-3 Rev. 6.6
FC-IP (IP over Fibre Channel) Complies with FC-IP 2.3 of FCA profile
Aggregate switch I/O bandwidth 640 Gbps if all 40 ports are running at 8
Gbps, full duplex
Port-to-port latency 700 nanoseconds
Appendix. Product specifications
39