IBM SAN Volume Controller 2145-CG8, Руководство по установке оборудования

Страница: 83 / 110

1
Power-button cover
2
Ethernet 1 activity LED. The operator-information panel LEDs refer to the
Ethernet ports that are mounted on the system board.
3
Ethernet 2 activity LED. The operator-information panel LEDs refer to the
Ethernet ports that are mounted on the system board.
4
System-information LED
5
System-error LED
6
Release latch
7
Locator button and LED
8
Power button and LED
Note: If you install the 10 Gbps Ethernet feature, the port activity is not reflected
on the activity LEDs.
Ethernet-activity LEDs
When Ethernet-activity LED
2
is lit, the node is transmitting or receiving data on
Ethernet port 1.
When Ethernet-activity LED
3
is lit, the node is transmitting or receiving data on
Ethernet port 2.
System-information LED
When the system-information LED is lit, a noncritical event has occurred.
Check the light path diagnostics panel and the event log. Light path diagnostics
are described in more detail in the light path maintenance analysis procedure
(MAP).
System-error LED
When it is lit, the system-error LED indicates that a system-board error has
occurred.
This amber LED lights up if the SAN Volume Controller hardware detects a fatal
error that requires a new field-replaceable unit (FRU).
Note:
See MAP 5800: Light path to help you isolate the faulty FRU.
Release latch
The release latch on the SAN Volume Controller 2145-CG8 gives you access to the
light-path diagnostics panel, which provides a method for determining the location
of a problem.
2 1
1
2 3
4
5
8 7
6
svc00722
Figure 41. SAN Volume Controller 2145-CG8 or 2145-CF8 operator-information panel
Appendix C. SAN Volume Controller hardware controls, indicators, and connectors
55