Step 10: Check Your Display Type
If you ordered a display with your system unit, the system unit has been set to use
the highest display resolution and refresh rate available for that display. If you want
to:
Attach a different display to your system unit
Change the default display resolution or refresh rate
then after completing the installation steps, refer to the Customer Installable Options
Library CD-ROM for the documentation for the graphics adapter. Change the
settings for the display you are installing.
Step 11: Connect the Display
Connect the display cable to the back of the display and to the graphics adapter
connector. Consult the "About Your Machine" document for the locations of installed
adapters.
For more display instructions, see your display documentation.
Note: Some displays require an additional cable.
1
2
3
4
5
Toroid
6
Setup Guide