2.3 Terminators
Terminator requirements are:
Diskette Drives: do not require terminators.
Hard Disk Drives and other storage devices:
- The last device in any SCSI chain must have the terminator
installed. (Some devices may have more than one terminator.)
- All other SCSI devices must have the terminators removed.
SCSI Adapter: Terminator requirements for the SCSI adapter vary
depending on the configuration of the system and the type of card.
The location and appearance of the terminators may vary from device to
device. An identification label or tag (usually "T-RES") is attached to
each terminator for easy identification.
Note: For additional information see "SCSI Devices" in the "Options and
Adapters" section, of this manual.
IBM PS/2 Model 90 XP 486 HMR
Terminators
¦ Copyright IBM Corp. 1990, 1991
2.3 - 1
