IBM Proventia Management SiteProtector SP1001, Руководство по конфигурации оборудования

Страница: 34 / 64

Pre-configuration Checklists
Review the checklists in this topic to ensure that you have the items you need
before you proceed with the configuration process. This topic includes the
following checklists:
v
Information required
v Cables required
Information required checklist
To establish network connectivity, you must enter specific information about your
network. Use the checklist in the following table to collect this information:
U
Setting Description
Management Port IP Address An IP address for the management
network adapter.
Example: 192.168.1.100
h
Your setting:
h
Management port subnet mask The subnet mask value for the network
connected to the management port.
Example: 255.255.255.0
h
Your setting:
h
Management port default gateway The IP address for the management
gateway.
Example:
192.168.1.1
h
Your setting:
h
Hostname The computer name for the SiteProtector
SP1001 appliance.
Example: SP1001
h
Your setting:
h
DNS server name The IP address of the domain name
server that the SiteProtector SP1001
appliance will use.
Example: 192.168.1.1
h
Your setting:
Cables required checklist
You must use certain cables to connect the SiteProtector SP1001 appliance to the
network and to a power source. These cables are included with the SiteProtector
SP1001 appliance:
U
Item
h
Ethernet cable
h
Two (2) Power cord(s) (included with the SiteProtector SP1001 appliance hardware)
10
SiteProtector System: SP1001 Hardware Configuration