IBM Power Systems 8001-22C, Руководство пользователя

Страница: 103 / 138

6. The adapter is installed.
Common procedures for servicing or installing features in the
8001-22C or 8005-22N
Learn about the common procedures related to installing, removing, and replacing features in the IBM
Power System S822LC for Big Data (8001-22C) system.
Before you begin
Observe these precautions when you are installing, removing, or replacing features and parts.
About this task
These precautions are intended to create a safe environment to service your system and do not provide
steps for servicing your system. The installation, removal, and replacement procedures provide the
step-by-step processes that are required to service your system.
DANGER: When working on or around the system, observe the following precautions:
Electrical voltage and current from power, telephone, and communication cables are hazardous. To avoid
a shock hazard:
v If IBM supplied the power cord(s), connect power to this unit only with the IBM provided power cord.
Do not use the IBM provided power cord for any other product.
v Do not open or service any power supply assembly.
v Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this
product during an electrical storm.
v The product might be equipped with multiple power cords. To remove all hazardous voltages,
disconnect all power cords.
– For AC power, disconnect all power cords from their AC power source.
Figure 57. Inserting the PCIe adapter riser
Installing and configuring the system
87