IBM Power System L922, Руководство пользователя

Страница: 24 / 40

Figure 7. Replacing the TPM card
Preparing the 5105-22E, 9008-22L, 9009-22A, 9009-22G, 9223-22H, or 9223-22S
system for operation after removing and replacing the trusted platform module card
To prepare the system for operation after removing and replacing the trusted platform module card,
complete the steps in this procedure.
Procedure
1. Ensure that you have the electrostatic discharge (ESD) wrist strap on and that the ESD clip is plugged
into a ground jack or connected to an unpainted metal surface. If not, do so now.
2. Slide the service access cover (A) onto the system unit.
3. Close the release latch (B) by pushing it in the direction shown.
10 Power Systems: Trusted platform module