manualshive.com logo in svg

IBM Power System IC922, Обслуживание

IBM Power System IC922 - мощный сервер, предназначенный для обработки данных. У нас вы можете бесплатно скачать руководство пользователя для этого продукта. Просто загрузите его с нашего сайта и начните использовать все возможности этого удивительного устройства.

Поделиться
Скачать
background image

or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications

could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference 

received, including interference that may cause undesired operation.

Responsible Party:

International Business Machines Corporation

New Orchard Road

Armonk, NY 10504

Contact for FCC compliance information only: [email protected]

Class B Notices

The following Class B statements apply to features designated as electromagnetic compatibility (EMC)

Class B in the feature installation information.
When attaching a monitor to the equipment, you must use the designated monitor cable and any

interference suppression devices supplied with the monitor.

Canada Notice
CAN ICES-3 (B)/NMB-3(B)

European Community and Morocco Notice
This product is in conformity with the protection requirements of Directive 2014/30/EU of the European

Parliament and of the Council on the harmonization of the laws of the Member States relating to

electromagnetic compatibility. IBM cannot accept responsibility for any failure to satisfy the protection

requirements resulting from a non-recommended modification of the product, including the fitting of non-

IBM option cards.

German Notice
Deutschsprachiger EU Hinweis: Hinweis für Geräte der Klasse B EU-Richtlinie zur

Elektromagnetischen Verträglichkeit
Dieses Produkt entspricht den Schutzanforderungen der EU-Richtlinie 2014/30/EU zur Angleichung der

Rechtsvorschriften über die elektromagnetische Verträglichkeit in den EU-Mitgliedsstaatenund hält die

Grenzwerte der EN 55022/ EN 55032 Klasse B ein.
Um dieses sicherzustellen, sind die Geräte wie in den Handbüchern beschrieben zu installieren und zu

betreiben. Des Weiteren dürfen auch nur von der IBM empfohlene Kabel angeschlossen werden. IBM

übernimmt keine Verantwortung für die Einhaltung der Schutzanforderungen, wenn das Produkt ohne

Zustimmung von IBM verändert bzw. wenn Erweiterungskomponenten von Fremdherstellern ohne

Empfehlung von IBM gesteckt/eingebaut werden.
Deutschland: Einhaltung des Gesetzes über die elektromagnetische Verträglichkeit von Geräten
Dieses Produkt entspricht dem “Gesetz über die elektromagnetische Verträglichkeit von Geräten (EMVG)

“. Dies ist die Umsetzung der EU-Richtlinie 2014/30/EU in der Bundesrepublik Deutschland.
Zulassungsbescheinigung laut dem Deutschen Gesetz über die elektromagnetische Verträglichkeit

von Geräten (EMVG) (bzw. der EMC Richtlinie 2014/30/EU) für Geräte der Klasse B
Dieses Gerät ist berechtigt, in Übereinstimmung mit dem Deutschen EMVG das EG-Konformitätszeichen -

CE - zu führen.

Verantwortlich für die Einhaltung der EMV Vorschriften ist der Hersteller: 

International Business Machines Corp. 

New Orchard Road 

Armonk, New York 10504 

Notices  171

Содержание Power System IC922































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Power System IC922

Taylor DA4 Operating Manual preview
DA4
Бренд: Taylor Страницы: 21
Pattfield Ergo Tools PE-AGS 3,6 Li Manual preview
PE-AGS 3,6 Li
Бренд: Pattfield Ergo Tools Страницы: 238
Marson M39020 Operating Manual preview
M39020
Бренд: Marson Страницы: 11
Samlexpower SEC-1223 Owner'S Manual preview
SEC-1223
Бренд: Samlexpower Страницы: 24
TP-Link kasa KL430 V1 Quick Start Manual preview
kasa KL430 V1
Бренд: TP-Link Страницы: 59
Celltronix 06-CE-PW13000 Instructions For Use Manual preview
06-CE-PW13000
Бренд: Celltronix Страницы: 10
Wacker Neuson DPU 100-70Les Operator'S Manual preview
DPU 100-70Les
Бренд: Wacker Neuson Страницы: 112
TDK-Lambda GENESYS 10KW Technical Manual preview
GENESYS 10KW
Бренд: TDK-Lambda Страницы: 74
HIKOKI DH 24PH2 Handling Instructions Manual preview
DH 24PH2
Бренд: HIKOKI Страницы: 48
Larson Electronics ITX-40 Instruction Manual preview
ITX-40
Бренд: Larson Electronics Страницы: 2
Clearaudio Accu Drive User Manual preview
Accu Drive
Бренд: Clearaudio Страницы: 12
Cleco CellClutch CLBA Instruction Manual preview
CellClutch CLBA
Бренд: Cleco Страницы: 128
Stanley FatMax PPRH5KL Quick Start Manual preview
FatMax PPRH5KL
Бренд: Stanley Страницы: 1
M-system 18KDYH2 Instruction Manual preview
18KDYH2
Бренд: M-system Страницы: 4
YATO YT-82834 Original Instructions Manual preview
YT-82834
Бренд: YATO Страницы: 101
Calortrans C50 II Manual preview
C50 II
Бренд: Calortrans Страницы: 11
Tohnichi DOL200N4 Operating Instructions Manual preview
DOL200N4
Бренд: Tohnichi Страницы: 12
PIKO 55046 Installation Instructions preview
55046
Бренд: PIKO Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды