IBM Power System AC922, Установка

Страница: 83 / 138

Maximum number
For details about the maximum number of adapters that are supported, see PCIe adapter placement
rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/p9eab/
p9eab_mtm_pciplacement.htm) and select the system you are working on..
Attributes provided
32 Gb/s of throughput.
Enhanced diagnostics and manageability.
Unparalleled performance and more efficient port usage.
Single initiator capability over a fiber link or with NPIV.
Multiple initiator capabilities.
Operating system or partition requirements
If you are installing a new feature, ensure that you have the software that is required to support the new
feature and that you determine whether any prerequisites must be met for this feature and attaching
devices. For information about operating system and partition requirements, see one of the following
topics:
• The latest version of enabling libraries and utilities can be downloaded from Fix Central (http://
www.ibm.com/support/fixcentral/).
• Power Systems Prerequisites (http://www14.software.ibm.com/support/customercare/iprt/home).
• IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/
ssic/interoperability.wss).
• The latest version of the device driver or IBM Power RAID adapter utilities (iprutils) can be downloaded
from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/webapp/
set2/sas/f/lopdiags/home.html).
• For support details, see the Linux Alert website (http://www14.software.ibm.com/webapp/set2/sas/f/
lopdiags/info/LinuxAlerts.html).
PCIe2 4-port (10 Gb + 1 GbE) SR / Copper SFP +RJ45 adapter (FC EN0S, FC EN0T, FC EN0U, and FC
EN0V; CCIN 2CC3)
Learn about the specifications and operating system requirements for the feature code (FC) EN0S, FC
EN0T, FC EN0U, and FC EN0V adapters.
Overview
The PCIe2 4-port (10 Gb + 1 GbE) SR / Copper SFP +RJ45 adapter is a PCI Express (PCIe) generation 2
(Gen2) x8, short form-factor adapter.
• The FC EN0S and EN0U are short, full height adapters. FC EN0S is an SR adapter whereas FC EN0U is a
Copper SFP adapter.
• The FC EN0T and EN0V are short, low-profile adapters. FC EN0T is an SR adapter whereas FC EN0V is a
Copper SFP adapter.
The adapter provides two 10 Gb SR optical ports and two 1 Gb RJ45 ports. This adapter provides a PCIe
2.0 host bus interface. The adapter supports the Ethernet network interface controller (NIC) function. The
adapter is a high-performance adapter that consolidates traffic for networking. The link aggregation and
failover features of the adapter make it suitable for critical network applications that require redundancy
and high availability.
The four-port adapter provides two 10 Gb small form-factor pluggable (SFP+) optical SR transceiver ports
and two 1 Gb RJ45 Ethernet ports. The two 10 Gb SR ports have little connector (LC) duplex-type
connectors. The optical transceiver uses shortwave laser optics and is attached with MMF-850nm fiber
cabling with LC connectors. See “Cables” on page 73 for more information about the optical cables.
Each 10 Gb port provides Ethernet connectivity with a nominal data rate of 10 Gbps (gigabits per second).
Figure 34 on page 71 shows the FC EN0S and FC EN0U adapter. Figure 35 on page 72 shows the FC
EN0T and FC EN0V adapter.
Installing and configuring the 8335-GTX 69