IBM Power System AC922, Установка

Страница: 27 / 138

Figure 7. Disk drive lock detail
7. Configure the installed disk drive for your environment.
After you insert the new disk drive, you must scan for the device. Choose one of the following options
depending on the operating system that you are using:
• Ubuntu Linux operating system:
Ubuntu can automatically detect storage devices. You may not need to rescan the disk drives;
proceed to verifying that the new disk drive is active.
To run the
rescan-scsi-bus command in the Ubuntu Linux operating system, log in to the system
as the root user, and run the following command:
rescan-scsi-bus
The rescan-scsi-bus tool is available in the scsitools package; install the package by using the
following command:
sudo apt-get install scsitools
• Red Hat Enterprise Linux (RHEL): To run the rescan command in the RHEL operating system, log in
to the system as the root user, and run the command:
rescan-scsi-bus.sh -a
Installing and configuring the 8335-GTX 13