IBM POWER GXT110P, Инструкция по установке и эксплуатации

Страница: 16 / 28

10. Type the following to display the Find window:
/
11. Type the following
devices.pci.33531188
and press Enter. (The system finds and highlights this device driver software.)
Example:
4.1.5.ð devices.pci.devices
12. Press PF7 to select the device software and press Enter.
13. The Install Additional Device Software screen displays. Entry data fields are
automatically updated. Press Enter to accept the data.
14. The ARE YOU SURE window displays. Press Enter to accept the data.
15. The COMMAND STATUS screen appears.
Ÿ
The term
RUNNING
is highlighted to indicate that the install and configure
command is in progress.
Ÿ
When
RUNNING
changes to
OK
, scroll down to the bottom of the page and
locate the Installation Summary.
Ÿ
After a successful installation,
SUCCESS
will appear in the Result column of the
summary at the bottom of the page.
16. Remove the installation media from the drive.
17. Press F10 to exit SMIT.
18. Go to graphics adapter install procedure, Chapter 4, “Installing Hardware” on
page 4-1.
3-2
POWER GXT110P Installation and User's Guide