IBM Power 730 Express 8231-E2B, Руководство пользователя

Страница: 60 / 112

v When placing the system into the service position, it is essential that all stability plates are firmly in
position to prevent the rack from toppling. Ensure that only one system unit is in the service position
at a time.
v Ensure that the cables at the rear of the system do not catch or bind as you pull the unit forward in the
rack.
v When the rails are fully extended, the rail safety latches lock into place. This action prevents the
system from being pulled out too far.
1. Open the front rack door.
2. Identify the system unit that you are servicing in the rack.
3. While holding the system unit release latches down on both the left and right sides, pull the system
unit out from the rack until the rails are fully extended and locked.
Placing the rack-mounted 8231-E2B, 8231-E1C, 8231-E1D, 8231-E2C,
8231-E2D, or 8268-E1D into the operating position
Use this procedure to place the rack-mounted system into the operating position.
When placing the system in the operating position, ensure that the cables at the rear of the system do not
catch or bind as you push the system unit back into the rack.
1. Unlock the blue safety rail latches (A) by lifting them upward.
Figure 30. Placing the system in the service position
48
Power Systems: System backplane for the 8231-E2B, 8231-E1C, 8231-E1D, 8231-E2C, 8231-E2D, or 8268-E1D