IBM Power 720 Express 8202-E4B, Руководство пользователя

Страница: 165 / 228

Use the following steps to stop the system by using the HMC:
1.
In the navigation area, expand the Systems Management folder.
2. Click the Servers icon.
3. In the Contents area, select the managed system.
4. Select Tasks > Operations > Power Off .
5. Select the appropriate power-off mode and click OK .
Related information :
Shutting down and restarting logical partitions
Stopping a system by using the SDMC
You can use the IBM Systems Director Management Console (SDMC) to stop the system or a virtual
server.
By default, the managed system is set to power off automatically when you shut down the last running
virtual server on the managed system. If you set the managed system properties on the SDMC so that the
managed system does not power off automatically, you must use this procedure to power off your
managed system.
Attention: If possible, shut down the running virtual servers on the managed system before powering
off the managed system. Powering off the managed system without shutting down the virtual servers
first causes the virtual servers to shut down abnormally and can cause data loss. If you use a Virtual I/O
Server (VIOS) logical partition, ensure that all clients are shut down or that the clients have access to
their devices with an alternate method.
To power off a managed system, you must be a member of one of the following roles:
v
Super administrator
v
Service representative
v
Operator
v
Product engineer
Use the following steps to stop the system by using the SDMC.
1. In the Power Systems Resource area, select the managed system you want to power off.
2. From the Actions menu, select Operations > Power Off .
3.
Select the appropriate power-off mode and click
OK
.
Removing and replacing the expansion unit cover or door
You might need to remove, replace, or install covers or doors on an expansion unit as a part of accessing
components or performing a service action.
Removing the front cover from the 7314-G30 or 5796
You might need to remove the front cover to perform service to the system.
To remove the front cover, follow these steps:
1. Remove the two thumbscrews (B) located on the left and right of the cover.
Common procedures for installable features
149