IBM PCI SCSI-2 Fast/Wide Single-Ended Adapter, Руководство по установке

Страница: 21 / 42

Changing SCSI Addresses
If you need to change SCSI addresses, follow the instructions supplied with each
device.
Terminating the SCSI Devices and Adapter
Some SCSI devices have built-in terminators controlled by a DIP switch, jumper, or
push button. Other devices use terminators on the cable. Some devices require a
terminator be plugged into the device on a connector. After planning your installation,
you need to supply the correct terminator to the SCSI device at each end of the
chain. Refer to the device instructions to find out how it is terminated. If necessary,
you should purchase terminators when you buy devices and cables.
Active terminators are required for all installations for reliable SCSI-2 operation.
The basic rules of terminating SCSI devices are:
Ÿ
Terminate the ends of the chain
Ÿ
Do not terminate devices in the middle of the chain.
Table A-1. Data Access Priorities for SCSI Addresses
Priority SCSI ID Actual SCSI Device Name
Highest 7 SCSI-2 Fast/Wide PCI Adapter
| 6
| 5
| 4
| 3
| 2
| 1
| 0
| 15
| 14
| 13
| 12
| 11
| 10
V 9
Lowest 8
Appendix A. Connecting SCSI Devices to the Adapter
A-3