IBM OpenCAPI Скачать руководство пользователя страница 79 | Manualshive

Страница: 79 / 82

background image

Japan Voluntary Control Council for Interference (VCCI) Notice

Taiwan Notice

United States Federal Communications Commission (FCC) Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult an IBM-authorized dealer or service representative for help.
Properly shielded and grounded cables and connectors must be used in order to meet FCC emission

limits. Proper cables and connectors are available from IBM-authorized dealers. IBM is not responsible

for any radio or television interference caused by using other than recommended cables and connectors

or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications

could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Responsible Party:

International Business Machines Corporation

New Orchard Road

Armonk, New York 10504

Contact for FCC compliance information only: [email protected]

Terms and conditions

Permissions for the use of these publications are granted subject to the following terms and conditions.
Applicability: These terms and conditions are in addition to any terms of use for the IBM website.

Notices 65

«
...
77
78
79
80
81
...
»

Содержание OpenCAPI



















































































Отзывы:

Нет отзывов

Похожие инструкции для OpenCAPI

Бренд: Accessory Power Страницы: 4

Бренд: Hainbuch Страницы: 68

AlarmDecoder AD2

Бренд: ADEMCO Страницы: 2

Бренд: Modecom Страницы: 24

Enercell 273-331

Бренд: Enercell Страницы: 1

Бренд: Belkin Страницы: 64

NetBlaster ZX345

Бренд: ZNYX Страницы: 12

Бренд: StarTech.com Страницы: 2

Бренд: Goobay Страницы: 10

Бренд: MSI Страницы: 102

Бренд: Spectravideo Страницы: 15

XET1001 - Powerline Network Adapter

Бренд: NETGEAR Страницы: 2

Бренд: NETGEAR Страницы: 12

Бренд: NETGEAR Страницы: 16

Бренд: CNET Страницы: 1

Бренд: Well Страницы: 7

Universal Adapter 2.0

Бренд: Xtensions Страницы: 29

Бренд: Intermec Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды