IBM Netfinity ServeRAID-4L Ultra160, Справочник пользователя

Страница: 57 / 114

Chapter 7. Installing and using the IPSSEND command-line
program
This chapter provides the information that is needed to install, start and use the
IPSSEND command-line program.
IPSSEND is an advanced command-line program that you can use to manage your
ServeRAID controllers. This utility program is provided on the IBM ServeRAID
Command-Line Programs diskette and the IBM ServeRAID Support CD.
Notes:
1. If you use a diskette, you must create the diskette using the instructions and
diskette images on the IBM ServeRAID Support CD. These files are available in
the following directory:
d :/IMAGES
where d is the CD-ROM drive.
Installing the IPSSEND command-line program
You can use the IPSSEND program to view the configuration of a ServeRAID
controller, initialize logical drives, synchronize logical drives.
You can use the IPSSEND program with the following operating systems:
v
Microsoft Windows NT
v
Microsoft Windows 2000
Installing IPSSEND for Windows 2000, Windows NT 4.0
To install this program for Windows NT or Windows 2000, do the following:
1. Start the server.
2. After the operating system starts, insert the IBM ServeRAID Support CD into the
CD-ROM drive.
3. Create an IPSADM directory on your hard disk. To do this, go to the operating
system command prompt and type:
md c :\ipsadm
where c is the drive letter of the drive where Windows NT or Windows 2000 is
installed.
4. Press Enter.
5. Copy the IPSSEND.EXE file to your hard disk drive by typing one of the
following at the command prompt:
For Windows 2000
copy z :\programs\winnt\cmdline\win2k\ipssend.exe c :\ipsadm
For Windows NT
copy z :\programs\winnt\cmdline\nt4_0\ipssend.exe c :\ipsadm
Note: Where z is the drive letter for the CD-ROM drive that contains the IBM
ServeRAID Support CD and c is the drive letter where Windows NT or
Windows 2000 is installed.
6. Press Enter. Remove the CD from the CD-ROM drive.
© Copyright IBM Corp. 2000
43