IBM Netfinity ServeRAID-4H Ultra160, Справочник пользователя

Страница: 81 / 192

12. Click Yes to continue working with your ServeRAID configuration. After
creating the arrays and logical drives, you must assign merge group numbers
to the shared logical drives.
13. In the Main Tree, click the ServeRAID controller that contains the logical
drives.
14. Click on the tool bar. The Configure controller for clustering window
opens.
15. Click the Shared check boxes for all the logical drives.
16. Do not change the merge group number from the default provided.
17. Record the controller name, partner name, and merge group numbers and
store them in a safe place. You will need this information to recover the
configuration if the ServeRAID controller should fail.
Note: You can save this information to a file by using the ServeRAID Manager
program:
a. In the Main Tree, click the server.
b. Click Actions
→
Save printable configuration.
18. Click OK.
19. To exit the ServeRAID Manager program, click File
→
Exit.
Completing the failover environment installation
To complete the installation of the failover environment, install the appropriate
ServeRAID device drivers while installing Windows NT or Windows 2000. Refer to
the following:
v
The documentation that came with the Windows NT or Windows 2000 software.
v
“Step 4: Installing device drivers” on page 33.
Figure 18. Configure controller for clustering window
Chapter 3. Configuring two ServeRAID controllers in a failover environment (Windows NT 4.0 and Windows 2000 only)
67