IBM Netfinity ServeRAID-4H Ultra160, Справочник пользователя

Страница: 70 / 192

Installing IPSMON for NetWare
To install the IPSMON program for NetWare:
1. Start the server.
2. After the operating system starts, insert the IBM ServeRAID Support CD into the
CD-ROM drive.
3. Copy the IPSMON.EXE file to your hard disk drive by typing on the DOS
command prompt:
copy z :\programs\netware\cmdline\ipsmon.nlm c :\nwserver
where z is the drive letter for the CD-ROM drive and c is the drive letter of the
drive where NetWare is installed.
Note: These instructions assume that you installed NetWare in the
NWSERVER directory.
4. Press Enter. Remove the CD from the CD-ROM drive.
Step 6: Starting the ServeRAID Manager program
After you have configured your ServeRAID controller, installed the device drivers,
installed the operating system, and installed the ServeRAID Manager program on
your system, you can administer and monitor your ServeRAID controllers, as well
as modify the ServeRAID controller configuration.
Starting the ServeRAID Manager program in Windows 2000 and
Windows NT
To start the ServeRAID Manager program in Windows NT and Windows 2000:
1. Click Start in the lower-left corner of the screen.
2. Click Programs
→
ServeRAID Manager
→
ServeRAID Manager. The Control
panel window opens. The program starts in Information mode and a window
similar to the following opens.
56
IBM
®
Netfinity
®
User’s Reference: ServeRAID
™
-4H Ultra160 SCSI Controller