IBM Netfinity ServeRAID-4H Ultra160, Справочник пользователя

Страница: 131 / 192

where:
v
controller is the ServeRAID controller number (1–12)
v
logicaldrive is the logical drive number (1–8)
v
noprompt is an optional parameter that overrides the user
prompt
backup Use the backup function to save a ServeRAID controller
configuration and BIOS settings to a diskette or to a physical drive.
The ServeRAID controller configuration must be valid.
Supported operating systems: Windows NT, Windows 2000, OS/2,
NetWare, Linux, OpenServer, UnixWare and DOS
Command: ipssend backup controller filename [noprompt]
where:
v
controller is the ServeRAID controller number (1–12)
v
filename is the path and file name where the configuration is to
be written
v
noprompt is an optional parameter that overrides the user
prompt.
copyld Use the copyld function to copy a source logical drive to a target
logical drive. The size of the target logical drive must be greater
than or equal to the size of the source logical drive.
Supported operating system: DOS
Command: ipssend copyld controller source target [noprompt]
where:
v
controller is the ServeRAID controller number (1–12)
v
source is the source logical drive number
v
target is the target logical drive number
v
noprompt is an optional parameter that overrides the user
prompt.
init Use the init function to initialize the first 0.5 MB of a logical drive.
This process will erase the partition tables and all data on the disk.
Supported operating systems: Windows NT, Windows 2000, OS/2,
NetWare, Linux, OpenServer, UnixWare, and DOS
Command: ipssend init controller drivenum [noprompt]
where:
v
controller is the ServeRAID controller number (1–12)
v
drivenum is the logical drive number (1–8)
v
noprompt is an optional parameter that overrides the user
prompt.
restore Use the restore function to load a configuration from a file stored
on a diskette or a hard disk. The configuration must be a valid
configuration file from the backup option in IPSSEND. This
operation overwrites the existing configuration information and BIOS
settings stored for the ServeRAID controller.
Supported operating systems: Windows NT, Windows 2000, OS/2,
NetWare, Linux, OpenServer, UnixWare, and DOS
Command: ipssend restore controller filename [noprompt]
where:
v
controller is the ServeRAID controller number (1–12)
Chapter 11. Using utility programs
117