IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 99 / 212

1. Make sure you are logged on as
root
.
a. If you are not, type:
su
b. When prompted, enter the
root
password.
2. Start the background-server component (daemon) running in
the background. To do this, type:
ipsadm &
3. Press Enter.
Ÿ
If you are using Novell NetWare:
1. Load the remote component. To do this, type:
load ipsadm.nlm
2. Press Enter
Notes:
a. To load the NetWare Administration program with
NetWare SFT III installed, load IPSADM.NLM in the
mirrored server engine. The ServeRAID adapters and
controllers in the primary and backup servers will appear
to the Administration and Monitoring Program as if they
were in one server.
b. When a rebuild, synchronization, or logical-drive
migration is in process, you cannot stop the
IPSADM.NLM module by pressing the Esc key. To stop
the module during one of these operations, you must
unload the IPSADM.NLM module.
Using the Background-Server Components
This section provides information about background-server
component command-line parameters and logging messages.
Chapter 4. Installing Device Drivers and Utility Programs
89