IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 97 / 212

7. Install any non-ServeRAID disk-storage adapters or controllers in
the server; then, attach the drives to the disk-storage adapters
and controllers.
8. Install the first ServeRAID adapter or controller from the list you
created in step 3f on page 86; then, attach the drives to the
ServeRAID adapter or controller.
9. Turn on the system and allow UnixWare to discover the new
disk-storage adapters and controllers.
10. Power down the system.
11. Repeat steps 8, 9, and 10 until all ServeRAID adapters,
ServeRAID controllers, and drives are installed.
12. You can now partition and format the logical drives attached to
the ServeRAID adapters and controllers. See the information
provided with UnixWare for more instructions.
Installing the Files while Installing UnixWare
To install the ServeRAID files while installing UnixWare 7.0:
1. Use the instructions provided with UnixWare to begin the
installation.
2. When a message appears asking if you want to install any HBA
diskettes, insert the IBM ServeRAID Device Drivers for SCO
Operating Systems Diskette; then, select Install HBA diskette.
3. Use the instructions provided in the UnixWare manual to
complete the normal installation process.
Installing the Files after Installing UnixWare
Use the following instructions to install the ServeRAID files after you
install UnixWare, or use these instructions to update a previously
installed ServeRAID file with a newer version. You can use the
UnixWare Pkgadd or the UnixWare SCOAdmin utility program to
install the files.
Chapter 4. Installing Device Drivers and Utility Programs
87