IBM Netfinity ServeRAID-3H Скачать руководство пользователя страница 90

Страница: 90 / 212

Message B appears, you must press Enter when prompted to
continue the installation.

5. Keep the

IBM ServeRAID Device Drivers for SCO Operating

Systems Diskette readily available. You will need it to configure
the device driver into the link kit.

For additional information about adding a BTLD at boot time, refer to
“Using Boot-Time Loadable Drivers” in the

SCO OpenServer

Handbook.

Adding BTLD after the Initial Installation

1. Start the server in system maintenance mode, and log in as

root.

2. Type:

installpkg

3. Press Enter; then, select the diskette drive in which you will

insert your installation diskette.

4. Insert the

IBM ServeRAID Device Drivers for SCO Operating

Systems Diskette, when prompted.

5. When prompted for the name of the package, type:

ipsraid

6. Press Enter; then, relink the kernel (as described in “Relinking

the kernel” in the

SCO OpenServer Handbook) by entering the

following commands:

cd /etc/conf/cf.d
./link_unix

7. After the kernel rebuilds, the following message appears:

The UNIX kernel has been rebuilt.

Do you want this kernel

to boot by default?

To continue, enter:

The system backs up the old kernel by moving

/UNIX to

/UNIX.OLD.

8. When the system asks for the kernel environment to be rebuilt,

enter:

IBM ServeRAID-3H and ServeRAID-3L Adapters

Содержание Netfinity ServeRAID-3H





















































































































































































































Результаты поиска

Содержание Netfinity ServeRAID-3H

Отзывы:

IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 90 / 212

Результаты поиска

Содержание Netfinity ServeRAID-3H

Отзывы: