IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 9 / 212

About This Book
This book provides the information needed to install and configure an
IBM ServeRAID-3H Ultra2 SCSI Adapter or an IBM ServeRAID-3L
Ultra2 SCSI Adapter. You also can use the configuration and
reference information in this book to configure the IBM ServeRAID
controllers provided on some IBM Netfinity and PC Server system
boards.
How This Book Is Organized
Chapter 1, “Getting Started,” contains introductory information about
the IBM ServeRAID-3H and ServeRAID-3L adapters, a content listing
for the adapter option packages, an installation overview, and
general information about RAID technology.
Chapter 2, “Installing and Cabling the Adapter,” provides information
about the standard features of the ServeRAID-3H and ServeRAID-3L
adapters, and instructions for installing and cabling the adapters.
Chapter 3, “Using the Configuration Programs,” explains how to use
the IBM ServeRAID Configuration Program and the IBM ServeRAID
Mini-Configuration Program. You can refer to the information in this
chapter when configuring one or more devices attached to a
ServeRAID adapter or controller.
Chapter 4, “Installing Device Drivers and Utility Programs,” contains
the instructions needed to install the ServeRAID device drivers and
programs provided on the IBM ServeRAID Configuration CD and
diskettes that came with the ServeRAID adapters.
Chapter 5, “Starting and Using the Utility Programs,” contains
instructions for starting and using the ServeRAID Administration and
Monitoring, IPSSEND, and IPSMON programs. You can use these
operating-system specific programs to maintain and monitor your
ServeRAID subsystem.

Copyright IBM Corp. 1996, 1998
vii