IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 87 / 212

Ÿ
The program copies the following ServeRAID device driver
and program files to the OS/2 subdirectory on your hard disk:
IPSRAID.ADD, IPSADM.EXE, and IPSRADM.EXE
Ÿ
The program copies the following ServeRAID Help file to the
\OS2\HELP directory: IPSRADM.HLP
6. Edit the CONFIG.SYS file and verify that there is only one copy
of the line BASEDEV=IPSRAID.ADD.
Notes:
a. If you have more than one ServeRAID or SCSI adapter in
your system, make sure that the BASEDEV statement for the
adapter controlling the startup (boot) device appears before
the BASEDEV statements for other ServeRAID or SCSI
adapters in the CONFIG.SYS file.
b. After you install any service packs, check the path for the
IPSRAID.ADD device driver and verify that the correct device
driver is installed.
7. Restart the server.
Starting the Administration and Monitoring Program
To start the ServeRAID Administration and Monitoring Program for
OS/2:
1. Go to the OS/2 subdirectory on the hard disk drive; then, type:
ipsradm
/lf=d:\path\logfile
Notes:
a. Make sure that the path you type exists. The program will
not create a path.
b.
Logfile is where the program will log messages.
c. If you omit the /lf parameter, the program will create the
IPSRADM.LOG default file in the OS2 subdirectory to log the
program messages.
2. Press Enter.
3. Use the following steps if you want to define IPSRADM to OS/2:
Chapter 4. Installing Device Drivers and Utility Programs
77