IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 85 / 212

4. Install OS/2, but when prompted to insert diskette 1, use the
updated Copy of OS/2 Diskette 1.
5. After you complete the OS/2 installation, insert the
IBM
ServeRAID Device Driver Diskette.
6. From an OS/2 window, type:
a:
Note: The a represents the drive assignment for the diskette
drive that contains the ServeRAID diskette.
7. Press Enter. Then, type:
ddinstal
8. Press Enter.
The OS/2 Device Driver Installation window will appear and
prompt you for the source and destination drives. The source
directory shows where to insert the
IBM ServeRAID Device
Driver Diskette. The destination directory shows where the
program will copy the device driver files.
9. Click on Install.
Ÿ
The program copies the following ServeRAID device driver
and program files to the OS/2 subdirectory on your hard disk:
IPSRAID.ADD, IPSADM.EXE, and IPSRADM.EXE.
Ÿ
The program copies the ServeRAID IPSRADM.HLP Help file
to the \OS2\HELP directory.
10. Edit the CONFIG.SYS file and verify that there is only one copy
of the line BASEDEV=IPSRAID.ADD.
Notes:
a. If you have more than one ServeRAID or SCSI adapter in
your system, make sure that the BASEDEV statement for the
adapter controlling the startup (boot) device appears before
the BASEDEV statements for other ServeRAID or SCSI
adapters in the CONFIG.SYS file.
b. After you install any service packs, check the path for the
IPSRAID.ADD device driver and verify that the correct device
driver is installed.
Chapter 4. Installing Device Drivers and Utility Programs
75