IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 83 / 212

7. When the next screen appears, press the Ins key to install an
unlisted driver.
8. When the next screen appears, press the F3 key to specify a
different path.
9. In the Specify a directory path field, type:
a:\netware
10. When prompted to select a driver to install, select
IPSRAID.HAM.
11. Select Yes when prompted to copy the IPSRAID.HAM driver.
12. When the prompt appears to specify the server boot path, type:
c:\nwserver
Notes:
a. This instruction assumes that you installed NetWare in its
default directory. If you did not install NetWare in the
NWSERVER directory on drive C, modify step 12
accordingly.
b. If any of the files you are installing already exist on the
server, NetWare will prompt you to save the older files.
Although it is not necessary to save the older files, it usually
is a good idea.
13. After the installation program copies all files, you can edit
parameters (such as the ServeRAID slot number) from the Driver
IPSRAID Parameter Actions screen.
14. After you edit the parameters, select Save Parameters and load
driver to load the ServeRAID device driver.
15. Press Esc to exit the installation screens.
Note: If you want NetWare to load the ServeRAID device driver
automatically during startup, you must add the appropriate
LOAD command (for example,
load ipsraid.ham slot=1
) to
the NetWare startup command file (usually
C:\NWSERVER\STARTUP.NCF).
Chapter 4. Installing Device Drivers and Utility Programs
73