IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 81 / 212

Use the instructions provided in the NetWare 3.12 manual along with
the following instructions to install the ServeRAID device driver,
background-server component, and Administration and Monitoring
Program files after installing NetWare, Version 3.12.
1. Insert the IBM ServeRAID Device Driver Diskette into the
diskette drive.
2. Go to the default NetWare 3.12 directory. To do this, type:
cd\server.312
Note: The SERVER.312 is the default NetWare 3.12 directory.
If you are using a different path, be sure to specify the
same path throughout the installation process.
3. Press Enter; then, from the operating-system prompt in the
SERVER.312 directory, type:
a:
Note: The a represents the drive assignment for the diskette
drive that contains the ServeRAID diskette.
4. Press Enter. Then, type:
cd netware
5. Press Enter. Then, type:
install
6. Press Enter. Then, follow the instructions that appear on the
screen to complete the ServeRAID device driver and program
installation.
Installing the Files while Installing NetWare 4.1X
Use the instructions provided in the NetWare 4.1X manual along with
the following instructions to install the ServeRAID device driver,
background-server component, and Administration and Monitoring
Program files while installing NetWare, Version 4.1X.
1. Use the instructions provided in the NetWare manual to begin
the installation.
Chapter 4. Installing Device Drivers and Utility Programs
71