IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 73 / 212

Programs for OpenServer and UnixWare
The ServeRAID program files available for OpenServer and
UnixWare consist of device drivers, background-server components,
and the IPSSEND and IPSMON command-line programs. (See
“IPSSEND and IPSMON Programs” on page 92 for more
information.)
The background-server components for SCO operating systems
install automatically when you install the ServeRAID OpenServer or
UnixWare device drivers.
To use the ServeRAID Administration and Monitoring Program with a
SCO operating system, you must first install the WIN32-Based
program on a Windows NT or Windows 95 client. Then, attach the
Windows NT or Windows 95 client to the same network as the
OpenServer or UnixWare system that contains the ServeRAID
adapter or controller. You must perform all administration functions
from the remote WIN32-Based client.
Installing the ServeRAID WIN32-Based Program
This section provides instructions for installing the ServeRAID
WIN32-Based program.
Before you begin the installation.
Ÿ
Be sure that your ServeRAID adapter or controller is physically
installed, properly cabled, and configured.
Ÿ
Be sure that your network operating system is installed and
functional.
Ÿ
If your network operating system is Windows NT, you can use
the ServeRAID WIN32-Based program remotely in the
client/server mode or locally in stand-alone mode. Use the
instructions in this section and in “Installing ServeRAID Device
Drivers” on page 65 to install the ServeRAID files.
Ÿ
The ServeRAID adapters and controllers do not support
Windows 95. However, you can run the WIN32-Based program
remotely on a Windows 95 client attached to a remote server
Chapter 4. Installing Device Drivers and Utility Programs
63