IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 71 / 212

Administration and Monitoring Program files provided with the
ServeRAID adapter. You can use these files with the Windows NT,
Windows 95, OS/2, Novell NetWare, SCO OpenServer, and SCO
UnixWare operating systems.
Programs for Windows NT and Windows 95
The ServeRAID program files available for Windows NT consist of
the ServeRAID Administration and Monitoring Program, device
drivers, background-server components, and the IPSSEND and
IPSMON command-line programs. (See “IPSSEND and IPSMON
Programs” on page 92 for more information.)
The IBM ServeRAID Administration and Monitoring Program for
Microsoft Windows NT or Windows 95 is called the WIN32-Based
program. This program provides a graphical interface that enables
you to monitor ServeRAID configuration changes being performed on
your server while your server is fully operational. You can create an
array, delete an array, create a logical drive, change the RAID level,
dynamically increase the logical drive size, rebuild an array, and
perform other basic ServeRAID configuration functions.
You can run the WIN32-Based program in the stand-alone mode
only on a Windows NT server. Or, you can run the WIN32-Based
program remotely on a Windows NT or Windows 95 client and
access the client from a server that has TCP/IP, a background-server
component (see “Background-Server Components” on page 62), and
one of the following operating systems installed:
Ÿ
Microsoft Windows NT
Ÿ
IBM OS/2 Warp Server and OS/2 LAN Server
Ÿ
Novell NetWare 3.12 and 4.1X
Ÿ
SCO UnixWare 7.0
Ÿ
SCO OpenServer 5.0.X
Chapter 4. Installing Device Drivers and Utility Programs
61