IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 63 / 212

Ÿ
Number of Offline Drives shows the current number of Offline
logical drives.
Ÿ
Number of Critical Drives shows the current number of Critical
logical drives.
Ÿ
Config. Updates shows the number of times that the
configuration has been changed since it has been initialized.
When you initialize the configuration, the Config. Update resets
to zero.
Ÿ
Flash Pgms shows the current number of times that the Flash
EEPROM has been written.
Ÿ
Locked, Bad Stripe, or Blocked Drive identifies the logical
drives that are affected.
– Bad Stripe Drives indicates the area of a logical drive that is
inaccessible.
– Locked Stripe Drives is a reserved field.
– Blocked Drives indicates the logical drives that are blocked.
You must unblock a blocked drive before you can use it.
See “Logical Drive State Descriptions” on page 37 for more
information.
Viewing the Configuration
You can select View Configuration from the Main Menu to view the
number of each logical drive, and to view the size, RAID level, state,
stripe-unit size, write policy, read-ahead status, and creation date for
each logical drive.
Using the Advanced Configuration Functions
You can select the Advanced Functions choice to reset the
ServeRAID adapter or controller, initialize the configuration, import
the configuration information from the drives, configure BIOS
settings, and view the adapter, controller, or PCI information.
Chapter 3. Using the Configuration Programs
53