IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 61 / 212

Using the ServeRAID Mini-Configuration Program
The ServeRAID Mini-Configuration Program is a quick way to display
the current settings for the ServeRAID adapter or controller. You
also can use this program to perform a limited set of the
configuration functions without using the
ServeRAID Configuration
CD.
To access the Mini-Configuration program:
1. Turn on the server. If the server already is turned on, press
Ctrl+Alt+Del.
2. When the ServeRAID Mini-Configuration prompt appears, press
Ctrl+i.
3. If your system contains more than one ServeRAID adapter or
controller, a selection screen will appear. To continue:
a. Use the Up Arrow (
↑
) or Down Arrow (
↓
) key to select an
adapter or controller.
b. Press Enter.
If your system contains only one ServeRAID adapter or
controller, or after you select a ServeRAID adapter or controller,
the Main Menu appears.
Descriptions of the choices available from the Main Menu of the
Mini-Configuration program are as follows:
Ÿ
View Controller Status shows the current status of the
ServeRAID adapter or controller. (See “Viewing the
Controller Status” on page 52 for more information.)
Ÿ
View Configuration shows the current configuration
information for the ServeRAID adapter or controller. (See
“Viewing the Configuration” on page 53 for more
information.)
Ÿ
Advanced Functions lets you initialize the configuration,
import configuration from drives, configure BIOS settings,
and view the controller and PCI information. (See “Using the
Advanced Configuration Functions” on page 53 for more
information.)
Chapter 3. Using the Configuration Programs
51