IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 59 / 212

The following choice appears on the Actions pull-down
menu when you select a hot-spare drive from the Main
Tree:
Ÿ
Remove from Hot-Spare State: This choice is
available in the Information mode only. Select this
choice to remove a hot-spare drive from the
configuration and set the drive state back to Ready.
The following choices appear on the Actions pull-down
menu when you select a physical drive, a physical drive
icon, or a SCSI channel icon from the Main Tree:
Ÿ
Set Drive State to Hot Spare: This choice is
available in the Information mode only. It appears
when the physical drive that you select from the Main
Tree is in the Ready state. You can select this choice
to add the drive to the configuration and to change its
state from Ready to Hot Spare.
Ÿ
Set Drive State to Online: This choice appears in the
Information mode, and you can use it to change the
state of a drive from Defunct to Online.
Attention:
You might lose data by setting a Defunct physical drive
that is part of an array to Online.
Ÿ
Replace Drive and Rebuild: This choice is available
in the Information mode only. Select this choice when
you want to physically remove a defunct drive from the
system and install a good drive in its place.
Ÿ
Change the SCSI Transfer Speed: This choice is
available in the Information mode only. It appears
when you select a SCSI Channel icon. You can select
this choice to change the transfer speed from its
default value of Optimal. When the transfer speed is
set to Optimal, the ServeRAID adapter or controller
determines the best transfer speed, based on the
types of SCSI drives and storage enclosures in use.
Choices available are Ultra2 SCSI, UltraSCSI, Fast
SCSI 2, and SCSI 2.
Chapter 3. Using the Configuration Programs
49