IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 54 / 212

Actions All choices available from the Actions pull-down menu also
are available from the pop-up lists that appear when you
use the right mouse button and click on the object in the
Main Tree.
The following choices appear on the Actions pull-down
menu when you select a ServeRAID controller from the
Main Tree:
Ÿ
Configure the ServeRAID Controller: This choice is
available in the Information mode only. It appears on
the pull-down menu when there are Ready drives and
logical-drive slots still available for the ServeRAID
controller.
Ÿ
Configure for Clustering: This choice is available in
the Information mode only. You can select this choice
to define the ServeRAID controller for use in a
high-availability, shared-disk cluster environment.
Detailed instructions for using the clustering features
are provided in the
IBM Netfinity High-Availability
Cluster Solution Installation and User's Guide. You
can obtain a copy of this manual at the following
address on the World Wide Web:
http://www.pc.ibm.com/netfinity/clustering
Ÿ
Initialize the Controller Configuration: This choice
is available in both the Configuration and Information
modes. Select this choice to delete the ServeRAID
controller configuration.
Attention:
After you initialize the controller configuration, you will
not have access to any data stored on the logical
drives attached to the selected ServeRAID adapter or
controller.
This choice deletes the existing configuration
information, sets all functional hard disk drives
attached to the controller to the Ready state, and
deletes all logical drives defined for the controller.
44
IBM ServeRAID-3H and ServeRAID-3L Adapters