IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 53 / 212

View The View pull-down menu contains the following choices in
both the Information and Configuration modes:
Ÿ
Small Icons: This is the default setting. When you
select this choice, small icons appear in the Main Tree
on the left and the Main Panel on the right.
Ÿ
Large Icons: Select this choice to display large icons
in the Main Tree on the left and the Main Panel on the
right.
Ÿ
Options: Select this choice to change the Initialization
and Synchronization mode, as follows:
– Basic: This is the default setting. When this
mode is Enabled, the configuration program
automatically initializes each new logical drive and
prevents access to the manual initialization and
synchronization functions. This choice also forces
the synchronization of all new RAID level-5 logical
drives attached to older ServeRAID adapter or
controller models that do not support the
auto-synchronization feature.
– Advanced: When Enabled, this choice lets you
select to automatically initialize new logical drives
and force the synchronization of all new RAID
level-5 logical drives before exiting the ServeRAID
Configuration Program.
Attention:
If you disable Automatic Initialization, the
ServeRAID Configuration Program will not initialize
each logical drive (by writing zeros to the first 1024
sectors of the logical drive) when it is created.
You still must initialize all newly defined logical
drives before storing data. If you disable the
synchronization feature and the level of firmware
being used by the ServeRAID adapter or controller
does not support the auto-synchronization feature,
you still must synchronize all RAID level-5 logical
drives before storing data.
Chapter 3. Using the Configuration Programs
43