IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 45 / 212

Ÿ
Channel shows the SCSI channel to which the hot-spare drive is
attached.
Ÿ
Drive Type shows the type of physical drive. For a hot spare,
this will always appear as Hard Disk Drive.
Ÿ
Size in MB shows the total capacity of the hard disk drive in MB.
Ÿ
Drive State shows the drive state. For a hot spare, this will
always appear as Hot Spare.
Ÿ
Vendor shows characters that represent the drive manufacturer.
Ÿ
Product or Model Number shows characters that represent the
product or model number for the drive.
Ÿ
Serial Number shows the serial number for the drive.
Ÿ
Drive Firmware Level shows the current level of microcode in
use for the drive.
Ÿ
PFA Error indicates the status, Yes or No, for predictive-failure
alerts. Yes indicates that PFA errors were detected and that you
should plan to replace the device. No indicates that PFA errors
were not found.
Physical Drive Information Panel
When you select the Physical Drives icon from the Main Tree,
information about the total number of drives connected to each
channel of the ServeRAID adapter or controller appears in the Main
Panel on the right.
When you select a specific physical drive from the Main Tree, the
following information appears in the Main Panel on the right:
Ÿ
SCSI ID shows the SCSI ID assigned to the drive.
Ÿ
Channel shows the SCSI channel to which the physical drive is
attached.
Ÿ
Drive Type shows the type of physical drive (Hard Disk,
CD-ROM, Tape, Enclosure, Removable-Media, or Unknown)
selected.
Chapter 3. Using the Configuration Programs
35