IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 40 / 212

c. Typically, the first logical drive defined on the first ServeRAID
adapter or controller found by system BIOS during startup
will be your startup (boot) drive.
8. If free space is available and you want to define another logical
drive, click on the Add Logical Drive button in the Main Panel.
9. Repeat steps 6, 7, and 8 for each logical drive that you want to
define; then, continue with step 10.
10. Click on the Next button.
11. Review the information that appears on the Configuration
Summary screen.
Note: To change the configuration, click on a Modify icon
button.
12. Click on the Apply button to accept and save the configuration.
13. If you have not already done so, install your operating system.
See the server documentation or the documentation provided
with your operating system for more information.
After you install your operating system, see Chapter 4, “Installing
Device Drivers and Utility Programs” on page 57 (or the installation
instructions provided with your server) for information about installing
the ServeRAID device drivers and utility programs.
Using the Information Mode
You can use the Information mode to view the configuration
information for the server, ServeRAID controllers, arrays, logical
drives, hot-spare drives, and physical drives that make up your
ServeRAID subsystem. You also can use this mode to change some
of the ServeRAID controller settings.
30
IBM ServeRAID-3H and ServeRAID-3L Adapters