IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 39 / 212

4. Using the right mouse button, click on the drive or SCSI Channel
icons in the Main Tree to select the drives that you want to add
to your arrays, delete from your arrays, or define as hot-spare
drives; then, select a choice from the pop-up list.
or
Drag the drive or SCSI Channel icon from the Main Tree and
drop it on the Array or Hot-Spare Drive icon in the Main Panel on
the right. If you change your mind, you can drag the icons back
to the Main Tree to remove them from the configuration.
5. After you select the data drives for your arrays and define your
hot-spare drives, click on the Next button.
If you change your mind, you can:
Ÿ
Remove a specific drive from a newly defined array or delete
an entire newly defined array. To do this, click on the Back
button, use the right mouse button to click on the specific
drive or Array icon in the Main Panel on the right, and then
select Remove from New Array or Delete New Array.
Ÿ
Remove a specific hot-spare drive or all newly defined
hot-spare drives. To do this, click on the Back button, use
the right mouse button to click on the Hot-Spare Drive icon in
the Main Panel on the right, and then select Remove New
Hot-Spare Drive or Remove All New Hot-Spare Drives.
6. Select a RAID level for the logical drive from the RAID pull-down
menu in the Main Panel. (See “Supported RAID Levels” on
page 6 for descriptions of the supported levels.)
7. Move the sliding bar in the Main Panel from right to left to allot
data and parity space for the logical drive.
Notes:
a. You can define from one to eight logical drives.
b. Some operating systems have size limitations for logical
drives. Before you save the configuration, you might want to
verify that the size of the logical drive is appropriate for your
operating system. See your operating-system documentation
for more detailed information.
Chapter 3. Using the Configuration Programs
29