IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 36 / 212

Ÿ
A hot-spare drive must be of equal or greater
capacity than the drive that it is intended to replace.
In this configuration, the 4300 MB drive can replace
any failed drives in Array B or Array C.
Using Express Configuration
To use the Express Configuration path:
1. Click on the ServeRAID controller that you want to configure in
the Main Tree.
2. Click on the Express Configuration radio button.
3. Click on the Next button.
4. Review the information that appears on the Configuration
Summary screen.
Notes:
a. Some operating systems have size limitations for logical
drives. Before you save the configuration, you might want to
verify that the size of the logical drive is appropriate for your
operating system. See your operating-system documentation
for more detailed information.
b. To change the configuration, click on a Modify icon button.
5. Click on the Apply button to accept and save the configuration.
6. If you have not already done so, install your operating system.
See the server documentation or the documentation provided
with your operating system for more information.
After you install your operating system, see Chapter 4, “Installing
Device Drivers and Utility Programs” on page 57 (or see the
installation instructions provided with your server) for information
about installing the ServeRAID device drivers and utility programs.
26
IBM ServeRAID-3H and ServeRAID-3L Adapters