IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 27 / 212

documentation or the system label inside the server cover for the
location of the SCSI connector on the backplane.)
Note: When the ServeRAID adapter and a SCSI CD-ROM drive
are connected to the same SCSI bus (cable), you must
enable the ServeRAID bootable (startable) CD-ROM
feature before the adapter or controller can start a
bootable CD-ROM. See “Setting the Bootable CD-ROM
Feature” on page 55 for more information.
14. If you have drives to install, install them now. See your server
documentation for drive installation instructions.
Notes:
a. The ServeRAID adapters and controllers use SCSI ID 7.
b. Removable-media devices (such as CD-ROM or tape drives)
connected to the same ServeRAID adapter or controller must
all have unique SCSI IDs, even when they are connected to
different channels. For example, if you have a CD-ROM
drive on Channel 1 set to SCSI ID 6, you must not have a
tape drive on Channel 2 or Channel 3 of the same
ServeRAID adapter or controller set to SCSI ID 6.
15. Install the server cover.
16. If you disconnected the cables and power cords in step 2 on
page 15, reconnect the cables and cords. See your server
documentation if you need detailed instructions.
17. If you want to attach an external SCSI device to the ServeRAID
adapter, continue with “Connecting External Devices” on
page 18. Otherwise, go to Chapter 3, “Using the Configuration
Programs” on page 19.
Chapter 2. Installing and Cabling the Adapter
17