IBM Netfinity ServeRAID-3H Скачать руководство пользователя страница 160 | Manualshive

Страница: 160 / 212

IBM Netfinity ServeRAID-3H Скачать руководство пользователя страница 160

3. Select Advanced Functions from the Main Menu; then, select Import

Configuration from Drive(s). (See “Using the Advanced Configuration
Functions” on page 53 for more information.)

WARNING:

n logical drives are critical; n logical drives are offline.

Explanation: One or more hard disk drives have failed.

Action: Replace the defunct drives as soon as possible to prevent data
loss.

Your server has an error due to a Blocked Logical Drive.

Explanation: One or more logical drives are in a blocked state. A blocked
logical drive cannot be accessed. See “Logical Drive State Descriptions” on
page 37 for additional information.

Action: Press F4 to unblock the logical drive, or press F5 to continue
without unblocking.

ServeRAID POST Messages

The following numeric POST messages appear in hexadecimal
format.

1xxx to 7xxx

Explanation: The POST detected an internal error.

Action: Have the system serviced.

2601 to 260B

Explanation: The POST detected an error with the ServeRAID subsystem.

Action: Have the system serviced.

2610

Explanation: The POST detected an error with the ServeRAID adapter or
controller hardware.

Action: Have the system serviced.

150

IBM ServeRAID-3H and ServeRAID-3L Adapters

«
...
158
159
160
161
162
...
»

Содержание Netfinity ServeRAID-3H





















































































































































































































Отзывы:

Нет отзывов