IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 157 / 212

Following drives found in new location
(old ch: old SID
>
new ch:
new SID)
Explanation: POST found that the location of one or more drives does not
match the stored configuration information.
Action: For more information, see “Configured drives are not in the
configured location.” on page 144.
Following new drives found
(old state: new state ch: SID)
Explanation: One or more drives were found at an unconfigured SCSI ID.
For each drive listed, a new state of Ready (RDY) appears.
Action: This is an information message. No action is required.
Installation stopped.
Explanation: The server cannot access the ServeRAID adapter or
controller.
Action: This is a follow-on message to a preceding message. Follow the
“Action” instructions for the preceding message to resolve the problem.
n logical drives are installed.
Explanation: n represents the number of defined logical drives.
Action: This is an information message. No action is required.
New adapter installed in a configured server or drives are imported
Explanation: This message might be preceded by the previous two
messages and the F5 and F6 key choices because the drives were not
found in the configured location. When the ServeRAID adapter or controller
detects that the identifiers of the drives do not match the adapter
configuration information, the following message appears:
Following new drives found:
(host id: old ch: old SID: new ch: new
SID)
Where: host id identifies the System Name where the ServeRAID adapter
or controller resides.
old ch is the channel that matches the drive configuration
information.
old SID is the SCSI ID that matches the drive configuration
information.
Chapter 6. Solving ServeRAID Problems
147