IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 152 / 212

ServeRAID Adapter and Controller Messages
This section lists the ServeRAID messages that might appear during
system startup.
The ServeRAID adapters and controllers provide a Device Event Log
that collects statistics on the number and types of events that occur
on a selected hard disk drive. After correcting a problem with the
disk array, clear the log so that you can identify any subsequent
errors quickly. For information about clearing the event log, see
“ERASEEVENT” on page 133.
All hard disk drives contain unique identifiers, such as the drive serial
number and manufacturer. During configuration, the ServeRAID
adapter or controller stores this information.
ServeRAID Startup Messages
During power-on self-test (POST), the ServeRAID adapter or
controller compares the stored configuration information to the
configuration that is actually present. If a discrepancy exists, one or
more status messages appear after POST completes, but before the
operating system loads.
Notes:
1. When the ServeRAID adapter or controller requires your input, a
list of function keys will appear below the message.
2. Where the “Action” information tells you to start the IBM
ServeRAID configuration program, insert the IBM ServeRAID
Configuration CD into the CD-ROM drive; then, restart the
server. The action column also provides general information
about the message.
3. Where SID and ch appear in these messages, SID shows the
SCSI ID for the device and
ch shows the channel to which the
device is attached.
4. Where m or n appears in these messages, a number will appear
in the actual message.
142
IBM ServeRAID-3H and ServeRAID-3L Adapters