IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 149 / 212

Ÿ
If you are using SCO OpenServer or UnixWare:
1. Type:
/usr/bin/ipsmon
2. Press Enter.
Using the IPSMON Program
When you start this monitoring program, it immediately begins polling
all ServeRAID adapters and controllers for specific conditions. If a
condition being monitored is found, this program logs a message to
the monitor, to a file, or to both the monitor and a file.
The IPSMON program uses command-line parameters to determine
where to log the messages. If you need help, you can type the
IPSMON -?
command for a list of valid parameters.
If you start this program without any command-line parameters, the
IPSMON program will log the messages to the IPSMON.LOG file,
and the messages will not appear on the monitor.
The valid parameters for IPSMON are:
Ÿ
-f:
filename
Use the -f parameter to specify the name of the file in which to
record messages. The default file name is IPSMON.LOG.
Ÿ
-s
Use the -s parameter to display messages on the standard
output (usually the monitor).
Ÿ
-?
Use the -? parameter to obtain a current list of valid parameters.
After you start the IPSMON program, the program will continuously
poll the ServeRAID adapters and controllers until you take one of the
following actions:
Ÿ
If you are using Windows NT or OS/2, press Ctrl
+
C.
Chapter 5. Starting and Using the Utility Programs
139