IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 146 / 212

SELFTEST The SELFTEST command is used to direct an
adapter or a device to perform its self-test.
Supported operating systems: DOS
Command:
IPSSEND SELFTEST
Controller Options
Replace:
Ÿ
Controller with the ServeRAID controller number
(1 to 8)
Ÿ
Options with AD for the ServeRAID adapter or
controller self-test or PD
Channel SID
for the
Device self-test.
Note: Channel represents the drive channel
and
SID represents the SCSI ID for the
device.
STARTDELY Use the STARTDELY command to set the number
of drives in a group to start up simultaneously and
to set the delay in seconds between the startup of
these groups of drives.
Supported operating systems: DOS
Command:
IPSSEND STARTDELY
Controller Options
Replace:
Ÿ
Controller with the ServeRAID controller number
(1 to 8)
Ÿ
Options with a question mark (?) to display
concurrent drive startup count: Drive Count (1
to 16) and Delay Time (3 to 15 seconds).
136
IBM ServeRAID-3H and ServeRAID-3L Adapters