IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 145 / 212

GETEVENT Use the GETEVENT command to display
information about various unexpected events. IBM
uses the Soft and Hard Event Logs for development
and debugging purposes only. The Device Event
Log contains event counters for each attached
physical device. These counters include:
Ÿ
Parity: An unexpected event while transferring
data on the SCSI bus. This usually indicates a
problem with the SCSI cable, connectors, or
terminators.
Ÿ
Soft: A SCSI device detected a
check condition
event.
Ÿ
Hard: The SCSI controller detected an
unexpected event. The controller is the most
likely cause.
Ÿ
Misc: The ServeRAID adapter or controller
detected an event that was most likely caused
by the device.
The Device Event Log also provides predictive
failure analysis (PFA) alerts, which indicate that the
device has signaled the ServeRAID adapter or
controller that it might fail in the near future.
Supported Operating Systems: Windows NT, OS/2,
NetWare, OpenServer, UnixWare, and DOS
Command:
IPSSEND GETEVENT
Controller Options
Replace:
Ÿ
Controller with the ServeRAID controller number
(1 to 8)
Ÿ
Options with one of the following: DEVICE for
Device Event Log, SOFT for the ServeRAID
adapter or controller Soft Event Log, or HARD
for the ServeRAID adapter or controller Hard
Event Log.
Chapter 5. Starting and Using the Utility Programs
135