IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 140 / 212

SYNCH Use the SYNCH command to synchronize the parity
information on redundant logical drives. If the parity
information is inconsistent, the IPSSEND program
will repair it automatically.
Supported operating systems: Windows NT, OS/2,
NetWare, OpenServer, UnixWare, and DOS
Command:
IPSSEND SYNCH
Controller Scope DriveNum
Replace:
Ÿ
Controller with the ServeRAID controller number
(1 to 8)
Ÿ
Scope with Drive for a single logical drive
Ÿ
DriveNum with the logical drive number (0 to 7)
Error-Recovery Commands
The IPSSEND error-recovery commands include the following:
GETSTATUS Use the GETSTATUS command to display the
current logical-drive status for the most recent
rebuild, synchronization, or logical-drive migration.
The status includes such information as the
remaining size of the logical drive, the percentage
completed for the function in process, or information
about the most recently completed logical-drive
function.
Supported operating systems: Windows NT, OS/2,
NetWare, OpenServer, UnixWare, and DOS
Command:
IPSSEND GETSTATUS
Controller
Replace:
Controller with the ServeRAID controller number
(1 to 8)
REBUILD Use the REBUILD command to rebuild a designated
disk drive. This command is valid for disk arrays
that contain one or more logical drives that are in
130
IBM ServeRAID-3H and ServeRAID-3L Adapters